Indoor Air Quality (IAQ) is a high priority in the sustainable design and renovation of commercial buildings, with the objective of providing clearer, uncontaminated interior air for building occupants. Working toward this important objective requires a proactive stance against potential threats to occupant health, such as mould and microbial growth.
The importance of mould-preventive design in wall assemblies has led to the development of stronger moisture management strategies to prevent this problem. Often overlooked, however, is adding fiberglass insulation to the ductwork of a building’s HVAC system as an additional tactic for fighting mold within the building envelope. Ductwork is a significant target for mould prevention and, therefore, demands the consideration of HVAC professionals.
THE LUNGS OF THE BUILDING
Metaphorically speaking, the HVAC system is to buildings what lungs are to the human body — it is responsible for ventilating stale or contaminated air from a space and replacing it with fresh, clean air. The ductwork of the HVAC system is the conduit that transports this air throughout the building. Taking this into consideration, it’s important to keep the inside of the ductwork clean and dry. Any impurities, such as mould and microbes, present in the ductwork can be drawn into the interior air that building occupants breathe.
mould and microbial growth can occur inside uninsulated sheet metal ductwork whenever excess moisture is present. This moisture can be the result of condensation that forms on the inside and outside of ducts. During the summer, as cold air travels through warm, uninsulated ducts, beads of moisture form on the interior or exterior of the ducts. In winter, the same occurs when heated, humidified air passes through cold ducts. There is high potential for condensation on duct surfaces whenever the temperature is either equal to or lower than the dew point temperature.
Condensed moisture becomes an IAQ threat when it combines with dust or dirt in uninsulated ducts to foster mould and microbial growth. If not prevented or caught in its early stages, the mould and microbial growth will quickly spread and pollute interior air with harmful airborne mould spores. Extended inhalation of airborne mould spores can significantly impact the health and comfort of building occupants, often causing headaches and irritability or more serious respiratory ailments, such as asthma.
The American Society of Heating, Refrigeration, and Air-conditioning Engineers (ASHRAE) Standard 62.1, Ventilation for Acceptable Indoor Air Quality, lists strategies for improving IAQ through mould and microbial growth prevention. Two of the most effective solutions recommended are to properly seal HVAC ductwork and to insulate it. These steps help prevent mould growth by allowing ductwork to maintain a constant temperature, which significantly reduces the possibility of condensation forming on duct surfaces. The most common duct insulation material, by far, is fibre glass.
fibre GLASS DUCT INSULATION
In addition to helping maintain a constant temperature, fibre glass — as an insulation material — is inorganic and, therefore, does not support mould growth or act as a nutrient for mould growth. It is also a safe, bio-soluble material. More than 20 studies conducted at noted universities and labouratories, including the World Health Organization, have examined concentrations of fibre glass and other Synthetic Vitreous fibres (SVFs) in residential and commercial buildings and consistently found they do not significantly contribute to indoor air pollution, refuting earlier research claims.
There are four types of fibre glass insulation commonly used in ductwork applications:
- fibre glass duct liner is applied to the interior of a rectangular sheet metal duct and designed to control heat loss or gain through duct walls, assist with quiet air distribution and control condensation. fibre glass duct liners are resistant to mould growth and fibre erosion in accordance with industry standards and prevent the distribution of airborne mould or glass fibres. With mat-faced airstream surfaces, the duct liners will resist damage during installation, maintenance and cleaning. They are manufactured in both roll and board form and are is available in a variety of densities and thicknesses.
- fibre glass duct wrap is resilient blanket insulation, with a vapour retarder facing, made to fit snugly over rectangular, spiral, flat oval or irregularly shaped surfaces. It can be easily cut and fitted for a neat, thermally effective installation and comes in various thicknesses and densities.
- fibre glass duct board is a 1- to 2-inch thick, rigid board (manufactured from resin-bonded inorganic glass fibres) that is used to fabricate fibre glass ductwork. For commercial applications that require thermal insulation, condensation control and acoustic control, fibre glass duct board provides an efficient, lower-cost alternative to sheet metal. Since insulation is integrated into the duct board, fibre glass ducts don’t require as many fabrication steps as insulated sheet metal ducts. The outside surface of the duct boards should feature a factory-applied reinforced aluminum air barrier and a vapour retarder, which minimizes air leakage and moisture accumulation.
- fibre glass commercial board — available unfaced, or with FSK or ASJ facings — is applied to the exterior of round, rectangular, oval or irregularly shaped ducts, plenums, chillers and other HVAC equipment. Ranging from flexible to rigid, commercial board products are used to reduce heat loss or gain through duct, plenum and equipment walls.
When properly installed in conjunction with an efficient HVAC system, each of these types of duct insulation can have a profound impact on improving IAQ. In addition to moisture and mould control, duct insulation also aids with improving the quality of the interior environment in the following two areas:
- Energy Conservation/Temperature Control — Most HVAC system designs for commercial and residential applications include insulated ductwork to minimize the amount of heat loss in the winter and cool air leakage in the summer. HVAC ductwork needs to perform efficiently to conserve energy and keep utility bills at a minimum. When combined with properly sealed ducts, fibre glass duct insulation plugs potential leaks, providing excellent thermal performance and occupant comfort.
- Acoustic Control —Noise travelling through bare sheet metal ducts throughout the entire building can cause reduced productivity and comfort among building occupants. Properly installed fibre glass duct insulation absorbs this excess noise. Careful selection of insulation materials, such as duct liner, can significantly decrease noise levels. Both fibre glass ductwork and metal ductwork lined with acoustical insulation can help control undesirable clatter, such as aerodynamic noise, breakout noise, mechanical equipment noise and crosstalk.
fibre glass duct insulation can provide significant improvement to a building’s interior environment. However, this all depends on how well it and the ductwork are maintained.
REGULAR HVAC SYSTEM MAINTENANCE
Like any other building component, ductwork and duct insulation need proper proactive care to get the best performance. It is important to schedule periodic filter changes and duct maintenance visits to keep the ductwork clean and in working order. Since preventative maintenance is very important in HVAC system design, many architects and engineers are now adding this recommendation to their specifications.
High-efficiency air filters of the correct size and quantity are key components of a well-maintained HVAC system. Ducts should be regularly inspected for the detection and remediation of moisture and contaminants. If any dust or debris is present, ducts must be cleaned in accordance with the National Air Duct Cleaning Association’s (NADCA) ACR 2013 Standard. NADCA ACR 2013 requires that HVAC cleaning be performed with the system under continuous negative pressure. The continuous negative pressure is accomplished through the use of a negative air machine. In addition, the standard requires the use of agitation. The three most common methods of agitation are:
- Contact vacuuming, which involves the conventional vacuum cleaning of interior duct surfaces. The hose of a high-powered vacuum cleaner with a high-efficiency particle arrestor (HEPA) filter is inserted through access holes cut into the ductwork. Particles that become airborne through cleaning that are not collected by the vacuum hose are drawn downstream through the duct and are removed from the system, preventing their release into the occupied space.
- Air sweeping, involving the introduction of compressed air into the duct through a hose capped with a skipper nozzle. The compressed air propels the nozzle through the ductwork, dislodging dirt, dust and debris. The dislodged particles then become airborne and are drawn downstream through the duct and out of the system.
- Power brushing, by which a pneumatically or electrically powered rotation bristle brush is used to loosen dirt, dust and debris and draw this material downstream into a vacuum collector. When dealing with fibre glass ducts or sheet metal ducts lined with fibre glass insulation, duct cleaning professionals must take special care to use only specially designed brushes with soft, flexible polymer bristles that remove debris without putting extra stress on surfaces.
MAINTAINING THE HVAC UNIT
In addition to filtration maintenance, the internal drain pans should be periodically cleaned to prevent moisture carryover and formation of biofilms in the pans. Humidifiers should be checked to prevent oversaturation of the conditioned air as well.
WELL INSULATED DUCTS = IMPROVED IAQ
Properly sealing and insulating sheet metal ducts or installing fibre glass ductwork are excellent, proactive ways to improve the IAQ of a building. High IAQ contributes greatly to the sustainability of buildings, and provides a purer and more comfortable interior environment. As a result, building occupants will be healthier and more productive, which benefits the owners of the building. It’s a win-win situation.
Author: Jim Voitel — CertainTeed Corporation
Jim Voitel has more than 30 years of experience in HVAC system design, construction and product development. He is product manager of CertainTeed’s HVAC insulation portfolio and is actively developing sustainable insulation products for the HVAC industry.