Don't forget the Basement
CertainTeed offers several fiberglass insulation products designed specifically for basements.
Basement wall insulation is designed for use in both residential and commercial projects where code or builder preference specifies an insulated basement area. This insulation is available with two perforated facings, white PSK and standard FSK; both insulation/facing combinations comply with ASTM C665 Type II, Class A.
Click Here to visit our Acoustic Performance Interactive Learning Guide
Help build an environment of change.™ - Sustainable Insulation
Get Inspired and Learn More
Download Product Specifications, Submittal Forms and SDS here
Check your local building code requirements. Basement Wall Insulation is installed horizontally either half-wall or full wall, starting at the sill plate. Half-wall application: Nail a 2" x 2" furring strip to the edge of the sill plate at the top of all walls to be insulated. Fasten a second row of 2" x 2" furring with power-actuated fasteners 48" or 72" below the sill plate furring, depending on the width of the insulation used. The 48" or 72" measurement must be the clear opening between both rows of furring. Roll out the insulation and staple to the upper and lower furring strips with the facing exposed. Full wall application: Fasten a third row of 2" x 2" furring, 1/2" to 1" from the floor. Staple a second roll of insulation to the centre and lower furring strips. The second roll may have to be cut to fit. If so, cut the insulation and facing to a width equal to the clear opening dimension between the furring strips plus 11/2", then cut back the insulation 11/2" in order to form a stapling flange at the bottom. Please contact CertainTeed prior to using an alternate method of installation.
Refer to CertainTeed's Lifetime Limited Insulation Warranty for Fiberglass Building Insulation.
CertainTeed insulation products improve building energy efficiency and reduce building energy consumption for the life of the structure. As a result, they help conserve nonrenewable energy sources, decrease dependence on foreign oil and lower greenhouse gas emissions. In addition, the recycled content of CertainTeed fiberglass insulation meets the EPA minimum Recovered Material Guideline for fiberglass products consisting of preconsumer and post-consumer glass cullet. CertainTeed Sustainable Insulation is GREENGUARD Gold Certified for low chemical emissions into indoor air during product usage.